Home > Cinema seat>Step lamp aluminum alloy

Installation

1.Cut step light to be 140mm shorter than the actual steps.

2.Fix rubber strip.

3.Drill holes with a gap of 250mm in the steps, fix Φ6 expansion tube, drill Φ4 holes in the step light shell, use the M4×40 self tapping screw to fix in the steps.

4.Insert the optical fiber and LED strips to the up and down small cubic tubes respectively.

5.Put the base of PVC-Carpet edge at both sides of step light, drill holes with a gap of 150mm in the steps, fix Φ6 expansion tube, drill Φ4 holes in the step light shell, use the M4×40 self tapping screw to fix in the steps.

6.Insert end cap LED to the end caps. Switch on, step lights are in parallel. Fix the end cap to the steps.

7.Install row numbers and rubber strips.

8.Finally, fix the covers of PVC-carpet edge.